The replacement locks measure 2 7/8" high and 1 5/16 wide when both pieces are side by side.

HQ 13221 Tight locks - Tips

Occasionally some people have some issues with tight locks after installing them on the HQ 13221 cage. In most cases this can be resolved by performing the following steps.

Each lock consists of 2 parts, the skinny piece called the latch and the moving part called the locking mechanism.

Start with the top door

1) Install the latch and tighten the screws.

2) Hold the locking mechanism in place insert both screws but DO-NOT-TIGHTEN.

3) Lock the cage door using the locking mechanism - (One of the loose screws may need to be screwed down a bit more so the head of the screw does not interfere with the locking mechanism - again screw it more but not tight)

4) With the locking mechanism fully engaged - tighten the two screws - test for movement.

This should solve the problem If it does repeat on the bottom door.

PS: We have also been told a bit of WD40 will loosen the locks as well.



Click for more info on the HQ 13221